Adding an IPsec route  |
|
Table of Contents: Administering Lotus Foundations Start: FS12
To create an IPsec route, follow these steps:
- Select VPN in the left menu of WebConfig.
- Select the IPsec Setup tab.
- Select Add New IPsec Route. The Create IPsec Route page is displayed.
Figure 1. Create IPsec Route screen
- In the Remote Server field, enter the public IP address or the fully qualified domain name (FQDN) of the remote server.
- To include a private subnet behind the remote server's firewall, enter the internal subnet containing the internal IP address of the remote unit in the Remote Subnet field. For example, if the unit's internal IP address is 192.168.10.1 with a subnet mask of 255.255.255.0, enter 192.168.10.0/24.
- Enter a remote IKE key. This is a password that should be unique and entered on both ends of the IPsec connection.
- Click Yes to enable the Perfect Forward Secrecy (PFS) feature. The two ends do not negotiate this automatically, so make sure that the setting is the same on both ends.
- For Enable this connection, click Yes.
- Click Save Changes.
Parent topic: IPsec: FS12
|
|
|
|
| Version 1 |
March 15, 2010 |
5:29:19 PM |
by IBM  |
|
|