Verifying the Conference Manager or Packet Switcher virtual host 

---

Confirm that the ports used by the Conference Manager and Packet Switcher components of the IBM® Sametime® Media Manager are defined correctly for the default_host virtual host. The virtual host must be correct after you federate a primary node into the Sametime System Console.

Procedure

1. Log in to the Sametime System Console.
2. In the navigation tree, click Servers -> Server Types -> WebSphere application servers.
3. On the Status page, click the link for the server hosting the Conference Manager or Packet Switcher component.
4. On the Configuration page, locate the Communications section, and then click on Ports.
5. In the Ports table, locate these ports and write down their port values.
   
• SIP_DEFAULTHOST
• SIP_DEFAULTHOST_SECURE
  
  
6. Back in the navigation tree, click Environment -> Virtual Hosts.
7. In the Virtual Hosts table, click defaualt_host.
8. In the Configuration page, under Additional Properties, click Host Aliases.
9. Verify that the Host Aliases table contains only entries with * as the Host Name and value you determined earlier from the Ports table. Delete all other entries with SIP_DEFAULTHOST and SIP_DEFAULTHOST_SECURE ports.
10. Save the changes to the master configuration.
11. Log out of the Integrated Solutions Console.
12. Repeat these steps for the other component, either Conference Manager or Packet Switcher.
    

Parent topic: Installing a Sametime Media Manager on Linux or Windows
Previous topic: Verifying the SIP Proxy and Registrar virtual host
Next topic: Clustering Sametime Media Manager components