Configure an IBM
® Sametime Connect client to communicate with a Sametime server that is listening for HTTPS connections using the host name (DNS) and port that you specified in the HTTPS tunneling settings for the server.
About this task
Every Sametime Connect client located outside of the firewall requires this configuration to tunnel through the firewall to the Sametime Community Services.
For each Sametime Connect client, configure the following settings in the "Sametime
® Connectivity" tab:
|Host||Type the new DNS that you mapped to the IP address that will be used for the Community Server.|
For example, if your base DNS for the server is sametime1.example.com, it was recommended that you use the following name for the new DNS:
That is the name you should type here.
|Use proxy||Select this setting.|
Use HTTPS proxy
|Select this setting and enter the host name (community-sametime1.example.com) and port (443) on which the Sametime Connect clients connect to the HTTPS proxy.|
Parent topic: Tunneling through the firewall when SSL is enabled
Previous topic: Configuring HTTPS tunneling settings for clients using port 443