You need to configure the circuits to be used by the Media servers. The traffic types, for which the relevant Media servers are to be used, determine, which circuits need to be configured.
Apart from the Media server, the Telephony Control Server system is already fully installed and configured.
The Media servers used are already fully installed and connected to Telephony Control Server via a network connection.
You have executed the associated previous configuration steps.
Adequate administrative permissions
The same circuit settings must be configured for all Media servers of the Media server deployment scenario.
Parent topic: Configuration of a Central Deployment Scenario with Several Media Servers
Step 1: How to Add Media Servers (central deployment, multiple Media Servers)
Step 3: How to Add a Destination
- Switch under Telephony Control Server -> Administration -> Media Servers -> Media Serverst -> <Media server> to the Circuits tab.
You see the circuits for the default traffic types of Telephony Control Server. These are: ann (System Announcement), aud (Audit), cnf (Conference), es (Surveillance).
- Perform the circuit configuration according to your requirements.
So that the audit of the various Media servers can be configured at a later date, the audit circuit (aud) must have been configured for all Media servers.
To delete an available circuit, select the associated checkbox and click on Delete.
To create an additional circuit, click on Add and specify the desired circuit settings.
- Click on OK to copy the entries to the system's database.
- Execute the described steps for all Media servers of the Media server deployment scenario.
Step 4: How to Configure the Redundancy /Load Balancing
Step 5: How to Activate the Audit
Step 6: How to Assign Treatments to the Destination