You need to configure the circuits to be used by the Media servers. The traffic types, for which the relevant Media servers are to be used, determine, which circuits need to be configured.
Apart from the Media server, the Telephony Control Server system is already fully installed and configured.
The Media server used is already fully installed and connected to Telephony Control Server via a network connection.
Routing areas have been configured and assigned to selected subscribers.
You have executed the associated previous configuration steps.
Adequate administrative permissions
Parent topic: Configuration of a Distributed Deployment Scenario without Branches
Step 1: How to Add Media Servers (distributed deployment, no branches)
Step 3: How to Add Destinations
- Switch under Telephony Control Server -> Administration -> Media Servers -> Media Servers -> <Media server> to the Circuits tab.
You see the circuits for the default traffic types of Telephony Control Server. These are: ann (System Announcement), aud (Audit), cnf (Conference), es (Surveillance).
- Perform the circuit configuration according to your requirements.
To delete an available circuit, select the associated checkbox and click on Delete.
To create an additional circuit, click on Add and specify the desired circuit settings.
- Click on OK to copy the entries to the system's database.
- Execute the described steps for all Media servers of the Media server deployment scenario.
Step 4: How to Configure the Redundancy /Load Balancing (distributed deployment, no branches)
Step 5: How to Activate the Audit (distributed deployment, no branches)
Step 6: How to Add an Origin Destination
Step 7: How to Assign Treatments to the Origin Destination